how to evaluate hydraulic cylinder?

To measure a hydraulic cylinder, you will want a several fundamental resources these types of as a tape measure or calipers. Here are the ways to measure a China hydraulic cylinders supplier cylinder:

one. Determine the Length: Measure the over-all size of the cylinder by measuring from the center of a person mounting hole to the center of the reverse mounting gap. This will give you the stroke size of the cylinder.

2. Measure the Bore Sizing: The bore dimension refers to the internal diameter of the cylinder barrel. It is critical to measure the bore properly as it decides the drive and ability of the cylinder. Use calipers or a micrometer to evaluate the diameter of the cylinder bore. Make certain that you measure throughout the center of the cylinder bore and not the worn or destroyed regions.

three. Evaluate the Rod Dimension: The rod measurement refers to the diameter of the piston rod. Evaluate the diameter of the rod making use of calipers or a micrometer. Again, measure across the heart of the rod and not any worn or destroyed spots.

4. Measure the Rod Length: Measure the duration of the piston rod from the heart of the piston to the stop of the rod.

five. Test Mounting Form: Note the mounting type of the cylinder, whether it is flange-mounted, clevis-mounted, or other forms. This facts is crucial when changing or deciding on a cylinder.

6. Check out Seal Form: Identify the variety of seals utilised in the cylinder, this sort of as piston seals, rod seals, or wiper seals. This information and facts is vital when buying substitution seals.

It is essential to evaluate hydraulic cylinders properly to ensure suitable suit and general performance. If you are not sure or have to have guidance, it is advised to consult with the manufacturer’s documentation or seek assist from a hydraulic professional to guarantee accurate measurements and good replacement.

Recent Posts