China Huading Swp-a Type Universal Joint Cardan Shaft pto shaft bearing

Merchandise Description

SWP A Type Cardan Shaft(JB/T3241-1991)

SWP partition profile bearing the cross shaft universal coupling items: substitute of bearings for, SWP sort Cardan shaft style bearing break up shaft bolt, appropriate for hoisting and conveying equipment and other hefty equipment, connecting 2 various axis transmission shaft, axis angle of A~F variety not far more than 10 levels, the G sort is not higher than 5 degrees.

Cardan shaft is broadly utilised in rolling mill, punch, straightener, crusher, ship push, paper creating tools, widespread equipment, h2o pump products, examination bench, and other mechanical programs.
 

 

·SWP A Type Cardan Shaft Basic Parameter And Primary Dimension(JB/T3241-1991)

Type Tactical diameter
D
mm
Nominal torque
Tn
kN·m
Fatique torque Tf
kN·m
Axis
angle
β
(°)
Stretch
size
S
mm
Dimension(mm) Rotary
inertia
kg·m2
Mass
kg
Lmin D1
js11
D2
H7
D3 E E1 B×h h1 L1 n-d Lmin Increase
one hundred
Lmin Enhance
100
SWP160A 160 sixteen eight ≤10 fifty 660 one hundred forty 95 114 15 four 20×12 6 85 six-thirteen .thirteen .0059 47 two.one
SWP180A 180 20 10 ≤10 sixty 752 one hundred fifty five one hundred and five 121 fifteen 4 24×14 seven 95 six-fifteen .22 .0072 sixty 2.three
SWP200A 200 31.five sixteen ≤10 70 823 one hundred seventy five 125 17 17 five 28×16 8 a hundred and ten 8-fifteen .37 .0114 81 three.four
SWP225A 225 forty 20 ≤10 seventy six 933 196 135 152 20 five 32×18 9 a hundred thirty eight-seventeen .63 .5710 109 six.6
SWP250A 250 63 31.five ≤10 eighty 978 218 150 168 25 five 40×25 twelve.5 135 8-19 1.02 .0407 147 seven.3
SWP285A 285 ninety forty five ≤10 100 1133 245 one hundred seventy 194 27 seven 40×30 fifteen 150 8-21 2.seventeen .0702 241 nine.four
SWP315A 315 one hundred forty 63 ≤10 one hundred ten 1250 280 185 219 32 seven 40×30 fifteen a hundred and seventy 10-23 3.86 .1144 322 12.
SWP350A 350 one hundred eighty ninety ≤10 one hundred twenty 1380 310 210 245 35 eight 50×32 sixteen 185 10-23 six.sixty six .1663 428 13.6
SWP390A 390 250 112 ≤10 a hundred and twenty 1495 345 235 273 forty eight 70×36 eighteen 205 10-twenty five 11.53 .2695 566 eighteen.
SWP435A 435 355 one hundred sixty ≤10 one hundred fifty 1710 385 255 299 42 10 80×40 20 235 sixteen-28 21.81 .3645 932 twenty.
SWP480A 480 450 224 ≤10 a hundred and seventy 1910 425 275 351 47 12 90×45 22.5 265 sixteen-31 38.04 .7571 1294 28.
SWP550A 550 710 315 ≤10 190 2135 492 320 402 fifty 12 100×45 22.5 290 sixteen-31 61.28 one.1842 1744 35.7
SWP600A 600 1000 500 ≤10 210 3580 544 380 450 55 fifteen 90×55 27.5 360 22-34 ninety eight.sixty three 1.7159 2330 40.5
SWP640A 640 1250 630 ≤10 230 2685 575 385 480 sixty fifteen 100×60 30 385 eighteen-38 167.sixty seven two.3080 3153 forty eight.three

·Be aware:L is the duration of installation,including the price of S/Z
 

·Product Display

♦Other Goods List

Transmission Machinery 
Elements Name
Model
Universal Coupling WS, WSD, WSP
Cardan Shaft SWC, SWP, SWZ
Tooth Coupling CL, CLZ, GCLD, GIICL
GICL, NGCL, GGCL, GCLK
Disc Coupling JMI, JMIJ, JMII, JMIIJ
High Flexible Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS

♦Our Organization
HangZhou CZPT Equipment Manufacturing Co., Ltd. is a technological innovation-based mostly organization specializing in the design and style and manufacture of basic transmission components and different auxiliary non-normal products accessories. The goods are largely utilized in metallurgy, electrical electricity, mining, chemical industry, petroleum, papermaking, shipbuilding, heavy business, and so on.

In a lot of industries, it has offered powerful complex and equipment help for numerous organizations around the globe. At existing, the products are also exported to Russia, Italy, Spain, Brazil, Ukraine, Turkey, Australia, Singapore, Vietnam, Indonesia, Malaysia, Sri Lanka, and other international locations and regions.

Welcome to customise merchandise from our manufacturing unit and you should give your design drawings or speak to us if you need other needs.

♦Our Solutions
1. Design and style Solutions
Our layout group has encounter in Cardan shafts relating to solution design and style and advancement. If you have any demands for your new solution or desire to make more improvements, we are right here to supply our assist.

two. Item Providers
uncooked resources → Cutting → Forging →Rough machining →Shot blasting →Heat treatment method →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping

3. Samples Procedure
We could build the sample according to your necessity and amend the sample continuously to fulfill your want.

4. Research & Development
We usually investigation the new needs of the industry and produce the new model when there is new automobiles in the industry.

5. Quality Management
Every action ought to be a unique test by Expert Staff in accordance to the regular of ISO9001 and TS16949.

FAQ
Q 1: Are you a buying and selling company or a maker?
A: We are a expert company specializing in manufacturing
different sequence of couplings.

Q 2:Can you do OEM?
Of course, we can. We can do OEM & ODM for all the buyers with tailored artworks in PDF or AI structure.

Q 3:How extended is your delivery time?
Generally, it is 20-thirty days if the items are not in inventory. It is according to amount.

Q 4: Do you supply samples? Is it free or extra?
Sure, we could supply the sample but not for free. Truly, we have a very good price principle, when you make the bulk purchase the value of the sample will be deducted.

Q 5: How lengthy is your warranty?
A: Our Guarantee is 12 months below normal circumstances.

Q 6: What is the MOQ?
A: Usually our MOQ is 1pcs.

Q 7: Do you have inspection procedures for coupling?
A:a hundred% self-inspection just before packing.

Q 8: Can I have a visit to your manufacturing facility just before the order?
A: Sure, welcome to pay a visit to our manufacturing facility.

Q 9: What is your payment?
A:1) T/T. 2) L/C 

Get in touch with Us
Insert: No.1 HangZhou Highway,Chengnan park,HangZhou City,ZheJiang Province,China

 

US $74.85-149,700
/ Piece
|
1 Piece

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated

###

Standard Or Nonstandard: Standard
Shaft Hole: as Your Requirement
Torque: 16kn. M – 1250kn. M

###

Samples:
US$ 500/Piece
1 Piece(Min.Order)

|

Order Sample

###

Customization:

###

Type Tactical diameter
D
mm
Nominal torque
Tn
kN·m
Fatique torque Tf
kN·m
Axis
angle
β
(°)
Stretch
length
S
mm
Size(mm) Rotary
inertia
kg·m2
Mass
kg
Lmin D1
js11
D2
H7
D3 E E1 B×h h1 L1 n-d Lmin Increase
100
Lmin Increase
100
SWP160A 160 16 8 ≤10 50 660 140 95 114 15 4 20×12 6 85 6-13 0.13 0.0059 47 2.1
SWP180A 180 20 10 ≤10 60 752 155 105 121 15 4 24×14 7 95 6-15 0.22 0.0072 60 2.3
SWP200A 200 31.5 16 ≤10 70 823 175 125 17 17 5 28×16 8 110 8-15 0.37 0.0114 81 3.4
SWP225A 225 40 20 ≤10 76 933 196 135 152 20 5 32×18 9 130 8-17 0.63 0.0290 109 6.6
SWP250A 250 63 31.5 ≤10 80 978 218 150 168 25 5 40×25 12.5 135 8-19 1.02 0.0407 147 7.3
SWP285A 285 90 45 ≤10 100 1133 245 170 194 27 7 40×30 15 150 8-21 2.17 0.0702 241 9.4
SWP315A 315 140 63 ≤10 110 1250 280 185 219 32 7 40×30 15 170 10-23 3.86 0.1144 322 12.0
SWP350A 350 180 90 ≤10 120 1380 310 210 245 35 8 50×32 16 185 10-23 6.66 0.1663 428 13.6
SWP390A 390 250 112 ≤10 120 1495 345 235 273 40 8 70×36 18 205 10-25 11.53 0.2695 566 18.0
SWP435A 435 355 160 ≤10 150 1710 385 255 299 42 10 80×40 20 235 16-28 21.81 0.3645 932 20.0
SWP480A 480 450 224 ≤10 170 1910 425 275 351 47 12 90×45 22.5 265 16-31 38.04 0.7028 1294 28.0
SWP550A 550 710 315 ≤10 190 2135 492 320 402 50 12 100×45 22.5 290 16-31 61.28 1.1842 1744 35.7
SWP600A 600 1000 500 ≤10 210 3580 544 380 450 55 15 90×55 27.5 360 22-34 98.63 1.7159 2330 40.5
SWP640A 640 1250 630 ≤10 230 2685 575 385 480 60 15 100×60 30 385 18-38 167.67 2.3080 3153 48.3

###

Transmission Machinery 
Parts Name
Model
Universal Coupling WS, WSD, WSP
Cardan Shaft SWC, SWP, SWZ
Tooth Coupling CL, CLZ, GCLD, GIICL
GICL, NGCL, GGCL, GCLK
Disc Coupling JMI, JMIJ, JMII, JMIIJ
High Flexible Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS
US $74.85-149,700
/ Piece
|
1 Piece

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated

###

Standard Or Nonstandard: Standard
Shaft Hole: as Your Requirement
Torque: 16kn. M – 1250kn. M

###

Samples:
US$ 500/Piece
1 Piece(Min.Order)

|

Order Sample

###

Customization:

###

Type Tactical diameter
D
mm
Nominal torque
Tn
kN·m
Fatique torque Tf
kN·m
Axis
angle
β
(°)
Stretch
length
S
mm
Size(mm) Rotary
inertia
kg·m2
Mass
kg
Lmin D1
js11
D2
H7
D3 E E1 B×h h1 L1 n-d Lmin Increase
100
Lmin Increase
100
SWP160A 160 16 8 ≤10 50 660 140 95 114 15 4 20×12 6 85 6-13 0.13 0.0059 47 2.1
SWP180A 180 20 10 ≤10 60 752 155 105 121 15 4 24×14 7 95 6-15 0.22 0.0072 60 2.3
SWP200A 200 31.5 16 ≤10 70 823 175 125 17 17 5 28×16 8 110 8-15 0.37 0.0114 81 3.4
SWP225A 225 40 20 ≤10 76 933 196 135 152 20 5 32×18 9 130 8-17 0.63 0.0290 109 6.6
SWP250A 250 63 31.5 ≤10 80 978 218 150 168 25 5 40×25 12.5 135 8-19 1.02 0.0407 147 7.3
SWP285A 285 90 45 ≤10 100 1133 245 170 194 27 7 40×30 15 150 8-21 2.17 0.0702 241 9.4
SWP315A 315 140 63 ≤10 110 1250 280 185 219 32 7 40×30 15 170 10-23 3.86 0.1144 322 12.0
SWP350A 350 180 90 ≤10 120 1380 310 210 245 35 8 50×32 16 185 10-23 6.66 0.1663 428 13.6
SWP390A 390 250 112 ≤10 120 1495 345 235 273 40 8 70×36 18 205 10-25 11.53 0.2695 566 18.0
SWP435A 435 355 160 ≤10 150 1710 385 255 299 42 10 80×40 20 235 16-28 21.81 0.3645 932 20.0
SWP480A 480 450 224 ≤10 170 1910 425 275 351 47 12 90×45 22.5 265 16-31 38.04 0.7028 1294 28.0
SWP550A 550 710 315 ≤10 190 2135 492 320 402 50 12 100×45 22.5 290 16-31 61.28 1.1842 1744 35.7
SWP600A 600 1000 500 ≤10 210 3580 544 380 450 55 15 90×55 27.5 360 22-34 98.63 1.7159 2330 40.5
SWP640A 640 1250 630 ≤10 230 2685 575 385 480 60 15 100×60 30 385 18-38 167.67 2.3080 3153 48.3

###

Transmission Machinery 
Parts Name
Model
Universal Coupling WS, WSD, WSP
Cardan Shaft SWC, SWP, SWZ
Tooth Coupling CL, CLZ, GCLD, GIICL
GICL, NGCL, GGCL, GCLK
Disc Coupling JMI, JMIJ, JMII, JMIIJ
High Flexible Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS

Choosing the Right PTO for Your Machine

There are many types of PTOs, and you may be wondering which one is the best choice for your machine. In this article, you’ll learn about Splined PTOs, Reverse PTOs, and Independent PTOs. Choosing the right PTO for your needs will allow you to operate your machine more efficiently.

LPTO

LPTOs can be dangerous for operators. They should stay at a safe distance from them to avoid getting entangled in the rotating shaft. If an operator gets caught, he or she could sustain severe injuries or even death. Safety precautions include wearing clothing that does not cling to the shaft.
There are many types of PTOs. Some of them support high power applications. These models have different shafts with varying spline configurations. Type 3 shafts have 20 splines, while Type 2 shafts have just 10. Type 3 and Type 2 shafts are referred to as large 1000 and small 1000 respectively by farmers.
The power that drives the PTO shaft comes from the gearbox through the countershaft. Standardizing the PTO speed helps to design equipment around the given speed. For example, a threshing machine is supposed to run at a specific peripheral velocity of the threshing cylinder, so pulley arrangements are usually designed with that speed in mind.
Because the PTO shaft is often low to the ground, it is easier to handle it from a kneeling position. Using a good surface to place the implement on will help you align the splines properly. To make this process easier, use a floor mat, a carpet, or a sturdy piece of cardboard. Once you have positioned the shaft on the PTO, press the locking pin button. If the PTO shaft is stuck, jiggling the implement a bit will help it slide into position.
Shaft Collar

Reverse PTO

There are several different ways to reverse the PTO shaft. Some older Massey Ferguson style tractors are designed to reverse the PTO shaft by turning it backward. This feature is useful for raising upright silo unloaders. The first method involves driving backward with the rear wheel jacked up and rotating while the rear wheel spins. This method is also useful for reversing a baler or unplugging a baler.
Another option is to install a reverse PTO adapter. These adapters are available for all types of PTOs. A reverse PTO is an excellent choice for any implement that can get stuck when rotating in one direction. However, it should only be used when it is absolutely necessary. The reverse PTO should not be rotated too far backward or for too long.
There are also different types of PTO shafts. Some transfer energy faster than others. That is why a large tractor’s PTO will transfer energy faster than a small tractor’s. Furthermore, independent PTOs don’t require a parking break like transmission PTOs do. There is also a difference between metric and domestic PTO shafts.
In farming, the reverse PTO is used when the farm machinery gets stuck or needs to be reversed. It also makes it possible to use the tractor to turn in the opposite direction. A PTO is a mechanical gearbox that transfers energy from the tractor’s engine to other implements. It can also supply power in the form of rotating pumps.

Splined PTO

The splined PTO shaft consists of six equal-sized splines that are spaced apart by grooves. The splines are angled to the axis of rotation of the PTO shaft. When the splines and the grooves meet, they align the screw end portion.
A splined PTO shaft can be retrofitted to most size 6 PTO shafts. It can also be used as a replacement for a worn out or damaged PTO shaft. This type of PTO shaft is recommended for tractors that require a quick and easy install.
Splined PTO shafts can be used for different types of agricultural equipment. They are compatible with standard and Weasler yokes. They can be cut to size and are available in North American and Metric series. They also come in an Italian Metric series. These shafts are easy to install and remove with a simple key.
A splined PTO shaft is essential for facilitating the interconnection of different components. A power take off (PTO) shaft tool engages the splined PTO shaft and turns it in order to align it with the input shaft of a cooperating structure. This tool is used to connect the PTO shaft to a tractor. This can also be used on a truck, trailer, or any other powered vehicle.
A wrench 40 is also useful for securing a PTO shaft. It enables the wrench to rotate the P.T.O. shaft approximately 30 degrees. The wrench’s leg 46 engages the shaft on the opposite side of the PTO shaft 16. Once the wrench is tightened, the tool can rotate the PTO shaft to make it align with the input shaft 16.
Shaft Collar

Independent PTO

Independent PTO shafts can be mechanical or hydraulic. The mechanical type has a separate on/off selector and control lever, whereas hydraulic PTOs have just one. The mechanical version is preferred for tractors that need to operate at lower speeds and for applications such as baling and tilling. The hydraulic version reduces noise and vibration.
Another advantage of an independent PTO is that it is easy to engage. Instead of engaging a clutch, you simply shift the PTO selector lever away from ‘OFF’ and flip the PTO switch to “ON.” This lever is usually located on the right hand side of the operator’s seat.
The ISO 500 standard provides specifications for independent PTO shafts. This specification lays out the size of the shaft, number of splines and the location of the PTO. In addition, it specifies the maximum RPM and shaft diameter for a PTO. The original ISO 500-3 specification calls for 540 revolutions per minute for shafts with six splines.
Another benefit of an independent PTO is its ability to be engaged or disengaged without using the transmission clutch. The lever can be pressed halfway or fully to engage an independent PTO. The independent PTO also allows you to stop the tractor while it is in motion. Independent PTOs are available in hydrostatic or mechanical configurations, and are particularly popular with hydrostatic drives.

LPTO shaft guard

An LPTO shaft guard prevents accidental rotational collisions by covering the shaft of a PTO. A PTO shaft is a moving part that can entrap a person’s legs, arms, and clothing. In a pinch, a person could become entangled in the shaft and suffer a serious injury. A PTO shaft guard is a great way to protect yourself against these dangerous incidents.
PTO mishaps can cause severe injuries and even fatalities. To prevent this, equipment manufacturers have made strides in improving the design and construction of their PTO drive shafts. A PTO shaft guard will protect the drive shaft from entanglement and tearing. Proper installation and maintenance of a PTO shaft guard can help protect the tractor, PTO, and other machinery.
Tractor PTO shaft guards are made from durable plastics and can be installed easily. They keep all the parts of the tractor in place and prevent accidents during operation. These parts are vital components for many farm equipments. A 540 RPM shaft can pull a person from a distance of five feet. A PTO shaft guard will prevent this from happening by keeping clothing from becoming entangled in the shaft.
Another important component of a PTO system is the master shield, which covers the PTO stub and the input driveline shaft of an implement. The master shield protects both the tractor PTO stub and the connection end of the input driveline shaft. It extends over the PTO stub on three sides. Many people never replace their master shields because they are too expensive.
Shaft Collar

Safety of handling a pto shaft

Handling a PTO shaft safely is a vital component of tractor safety. Safety shields must be properly fastened to the shaft to prevent any accidents. The shield should also be inspected and maintained regularly. Otherwise, foreign materials, including clothing, can enter the shaft’s bearings. It is also important to walk around the rotating shaft whenever possible.
Power takeoff shafts are used to transfer mechanical power from farm tractors to implements. However, improper handling of these devices can lead to severe injuries, including amputation and multiple fractures. Spinal injuries are also common, especially if an individual is rotated around the shaft.
Operator awareness is key to avoiding PTO entanglement. Performing repairs while a machine is in operation or wearing loose, frayed clothing may lead to injury. It is also important to read the manufacturer’s instructions before operating a PTO. Lastly, it is important to never operate a PTO while the engine is running.
PTO shafts should be protected by ‘U’ or ‘O’ guards on the tractor and the attached implement. It is also important to use a PTO stand. As with any mechanical part, handling a PTO shaft requires care. Always ensure that the tractor is off before working and remove the key before working on it. Also, it is important to avoid stepping on the drive line or going under it. Make sure you wear protective clothing and shoes. Avoid wearing clothes that have laces as they could become entangled in the shaft and cause injury.
The connection to the PTO shaft should be close to the ground. If it is not, kneel on a flat surface. A piece of carpet, automobile floor-mat or cardboard can work well. Then, align the splines on the PTO shaft. To do this, press the locking pin button, then pull the ball-lock collar back, and then push the shaft onto the PTO.
China Huading Swp-a Type Universal Joint Cardan Shaft     pto shaft bearingChina Huading Swp-a Type Universal Joint Cardan Shaft     pto shaft bearing
editor by czh 2023-01-28

Recent Posts