China Good quality Js Type Stainless Steel Grid Coupling with Factory Price pto shaft cover

Product Description

JS200 Series Grid Coupling

Grid Coupling is widely used in metallurgy, mining, lifting, transportation, petroleum, chemical, ships, textile, light industry, agricultural machinery, printing machines and pumps, fans, compressors, machine tools and other mechanical equipment and industry shaft transmission.

Feature
1.The serpentine spring as the elastic element, the elastic strong at the same time, greatly improves the grid coupling torque, widely used in heavy machinery and general    machinery.The serpentine spring special technology department, has long service life, allowing higher speed, has good ability to compensate in the axial, radial and angle

2.High transmission efficiency, start safety. Transmission efficiency of up to 99.47%, short-time overload capacity is 2 times the rated torque, operation safety.

3.Simple structure, convenient assembly and disassembly, long service life

4.Damping effect is good to avoid the resonance.

♦Basic Parameter And Main Dimension

Model Nominal
Torque
Nm
Speed
r/min
Y,ZBore
d1,d2
D B J A L F E H M Clearance (K) Oil injection
Kg
No bore mass
Kg
Max Min Min Standard Max
JS201 45 6000 28 14 111 107 33 40 52 40 72 10 55 1.5 3 5 0.571 3
JS202 125 6000 35 14 120 107 33 50 52 40 82 10 55 1.5 3 5 0.571 3.4
JS203 224 6000 42 14 129 107 34 55 52 41 87 10 59 1.5 3 5 0.057 3.9
JS204 400 6000 48 14 148 127 39 65 62 45 100 12 68 1.5 3 5 0.057 6
JS205 630 5000 55 19 162 127 43 75 62 52 115 12.7 75 1.5 3 5 0.085 8
JS206 900 4500 65 19 173 167 45 90 82 55 134 12.7 78 1.5 3 5 0.085 12
JS207 1800 4200 75 28 200 228 60 105 112 66 153 12.7 105 1.5 4 6.5 0.17 19
JS208 3150 4000 85 28 232 228 60 125 112 70 170 12.7 108 1.5 4 6.5 0.255 26
JS209 5600 3200 100 42 267 290 72 140 142 200 15.7 134 1.5 6 10 0.425 39
JS210 8000 3000 110 42 286 290 74 160 142 218 15.7 135 1.5 6 10 0.51 54
JS211 12500 2700 125 60 319 290 89 180 142 250 17 157 1.5 6 13 0.74 72
JS212 18000 2400 150 70 378 350 89 220 172 294 21 159 1.5 6 13 0.91 117
JS213 25000 2200 180 70 416 350 89 255 172 327 21 165 1.5 6 13 1.14 169
JS214 35500 2000 200 110 476 430 106 270 212 388 24 202 3 6 13 1.9 242
JS215 50000 1700 220 120 533 430 114 305 212 424 30 216 3 6 13 2.8 349
JS216 63000 1600 250 130 584 510 119 360 252 474 30 226 3 6 13 3.5 491

·Note:The shaft holes of the half coupling can be made into conical holes. The dimension of the conical holes are the same with JS100 series size.

♦Product Show

♦Other Products List

Transmission Machinery 
Parts Name
Model
Universal Coupling WS,WSD,WSP
Cardan Shaft SWC,SWP,SWZ
Tooth Coupling CL,CLZ,GCLD,GIICL,
GICL,NGCL,GGCL,GCLK
Disc Coupling JMI,JMIJ,JMII,JMIIJ
High Flexible Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS

Our Company

HangZhou CZPT Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 86 employees in our company, including 2 senior engineers and no fewer than 20 mechanical design and manufacture, heat treatment, welding, and other professionals.

Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.

Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective. 

Our Services
1.Design Services
Our design team has experience in cardan shaft relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.

2.Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping

3.Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.

4.Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the market.

5.Quality Control
Every step should be special test by Professional Staff according to the standard of ISO9001 and TS16949.

FAQ
Q 1: Are you trading company or manufacturer?
A: We are a professional manufacturer specializing in manufacturing
various series of couplings.

Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artworks of PDF or AI format.

Q 3:How long is your delivery time?
Generally it is 20-30 days if the goods are not in stock. It is according to quantity.

Q 4: Do you provide samples ? Is it free or extra ?
Yes, we could offer the sample but not for free.Actually we have a very good price principle, when you make the bulk order then cost of sample will be deducted.

Q 5: How long is your warranty?
A: Our Warranty is 12 month under normal circumstance.

Q 6: What is the MOQ?
A:Usually our MOQ is 1pcs.

Q 7: Do you have inspection procedures for coupling ?
A:100% self-inspection before packing.

Q 8: Can I have a visit to your factory before the order?
A: Sure,welcome to visit our factory.

Q 9: What’s your payment?
A:1) T/T. 

Contact Us
Web: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China

Standard Or Nonstandard: Standard
Shaft Hole: as Required
Torque: as Required
Bore Diameter: as Required
Speed: 4000r/M
Structure: Flexible
Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Shaft Collar

What Is a PTO Shaft?

There are a few different types of PTO shafts. For example, there are German, Italian, and North American types. Moreover, there are several series options, such as cap-to-cap overall length, bearing diameter, and snap rings. Each type comes with different features and benefits, so it is important to select the correct one for your needs.

Power Take-Off

The Power Take-Off (PTO) shaft is a mechanical coupling system that couples an aircraft’s accessory gear box with an engine. It transmits high rpm and peak torque. It is an indigenously developed product, which has been cleared for flight fitment and successfully completed an engine ground run test. It is now being used by two Indian manufacturers.
There are four main types of PTOs. Semi-permanently mounted power take-offs are common on marine engines and industrial engines. These power take-offs are used to power secondary implements and accessories. In airplanes, accessory drives are also common. Jet aircraft use four different types of PTO units:
PTO shafts are composed of two telescoping pieces that slide into one another. This allows the user to lower and lift the implement. They are also equipped with universal joints, also known as U-joints. These joints allow flexibility and durability. These joints are held together by two yokes at each end of the shaft.
The speed of the power take-off shaft varies according to tractor size. Larger tractors turn the shaft at 1,000 revolutions per minute, while smaller tractors turn it at 540 revolutions per minute. This means that a person trapped in the open PTO shaft could be whipped around nine times in one second, while a person caught in a smaller tractor could be whipped around 16 2/3 times in one minute. Ultimately, the weight of the person could even cause the engine to stall.

Applications

PTO shafts have a variety of uses in the farm equipment industry. They can be connected to a wide variety of work equipment. For instance, a PTO is commonly used to power a hydraulic pump on a tractor’s front end. In such a case, a small shaft with a U-jointed design will attach to a yoke coupler and turn the pump. While this is not as universal as a tractor PTO, it still falls under the category of a PTO.
A PTO system will have a female coupling on one end and a male coupling on the other end. This essentially acts as an extension adaptor. It will transmit torque signals from the shaft to a static cover assembly to determine the speed and torque in both directions. In some cases, a PTO system will be able to record the data directly onto a PC or other electronic device.
In addition to power take-off systems, these systems can also provide power for auxiliary equipment. In addition, a split shaft PTO allows the power of one engine to power the axle of another vehicle. Depending on the engine’s power, a PTO may use either an air or hydraulic pump to power auxiliary equipment.
The PTO shaft is also useful for securing a tractor or equipment. This device features safety shields on both ends and fits securely inside the secondary shaft. The PTO shaft can be found in a variety of shapes. There are domestic-shaped and metric-shaped versions.

Safety precautions

Shaft CollarOperator awareness is key in preventing PTO shaft entanglement. It is important to avoid performing any repairs while the machine is operating. It is also important to avoid wearing loose or frayed clothing that could become entangled in the rotating shaft. It is also essential to read and follow the tractor’s operating manual. Also, ensure that the PTO shaft is only used for its intended purpose.
A power take-off, or PTO, is a type of attachment that transmits mechanical power from a tractor to another piece of farm machinery. Common examples include hay balers, rotary cutters, weed mowers, and forage blowers. These attachments are often equipped with protective shields to prevent entanglement. The shaft should always be covered when in use.
Operators should also avoid getting too close to the PTO shaft. The operator may become entangled if they accidentally approach the spinning shaft. They should also avoid wearing loose clothing because loose clothing can easily get caught in the stub and cause serious injury. These safety precautions are essential for safe operation of all farm machinery.
When using a PTO with heavy drive, it is important to use a heavy-duty model with a PTO shaft that is appropriate for the application. Alternatively, use a universal joint or wide-angle universal joint. These attachments can be a safer alternative to traditional PTOs. Draw-bar pins on trailed machines should be firmly secured to avoid damaging the PTO shaft. It is also recommended to guard all drive shafts on the machine.

Design

A PTO shaft has several advantages. It is a versatile power transmission that is ideal for heavy-duty equipment. Its design is rigid, yet flexible, allowing for high-speed operation. This is due in part to the splines, which prevent the parts from separating during operation.
The gears of a PTO drive are made from high-quality steel, which increases their durability. They are made from SCM 440 gear material. This material has a high tensile strength and a high yield point. It also has a high Young’s modulus of 206,000 N/mm2. Its Poisson’s ratio is 0.3, while its pressure angle is twenty degrees. In addition, its addendum and dedendum coefficients are both greater than 1.0.
Designed for use on industrial and marine engines, PTOs allow the driver to transfer power from a primary mover to a PTO-powered attachment. They are easy to install and offer improved service life and decreased downtime. In aircraft applications, PTOs are also common. Jet aircraft and agricultural equipment often use PTOs.
The PTO shaft’s dimensions are crucial for preventing vibration. It should extend at least 14 inches from the hitch point to the input shaft of the implement. In some cases, a shorter shaft may not fit the tractor, so it is important to choose the right size. If the PTO shaft is too short, it could cause the two parts to separate when the tractor is turning a corner.

Cost

Shaft CollarA PTO shaft is a very important part of a tractor because it transfers power to an attached attachment. These attachments typically include rotary tillers, brush cutters, hush hug, and mowers. While many attachments use a PTO shaft, the connection flange is not standardized. Some older models of tractors may have a connection flange that is closer to the tractor.
A PTO shaft will work with either a standard or a Weasler yoke. You can also choose from metric and North American models. There are also Italian PTO shafts. To ensure the best performance and durability, it is essential to ensure that the shaft is free of damage. To avoid such damage, a PTO shaft should be purchased from a reputable supplier.
PTO shafts are made from high-quality steel and feature a 1-3/8″ 6-spline at both the tractor and the implement end. In addition, splined PTO shafts are easy to replace and provide excellent horsepower. These PTO shafts can also increase a tractor’s work efficiency.
The cost of a PTO shaft replacement can vary. The average price range for a front-wheel-drive half-shaft is $470 to $940, and the cost for a rear-wheel-drive drive half-shaft replacement is about $1,600 to $2,000. The parts cost about two hundred dollars and the labor could take an hour or more.

Buying guide

If you’re looking to replace a PTO shaft on a lawn tractor, it’s important to consider several factors. First, the PTO shaft needs to be compatible with the tractor you plan to use it on. Then, you need to determine which size universal joint you need. To do this, you can use a PTO shaft size chart.
The PTO shaft is the component that transfers power from the tractor to the attached implement. It’s made up of several parts, including the internal and external PTO yoke, the universal joint, and the safety chain and shield. There are several types of PTO shafts available. You’ll want to choose the right size for your machine, as well as the number of PTO shafts you need.
A PTO shaft is essential for a tractor because without it, the tractor cannot drive. Understanding the PTO parts will help you operate farm machinery more effectively. For instance, if you’re buying a new Power Take Off shaft, you’ll want to look for one that’s compatible with the model and year of the tractor.
You’ll also need to consider the length of the PTO shaft. A PTO shaft can vary from 53 inches when compressed to 77 inches when fully extended. The most common length for a PTO shaft is about fifty-three inches, but you can also choose a longer one if you need more flexibility.
China Good quality Js Type Stainless Steel Grid Coupling with Factory Price   pto shaft coverChina Good quality Js Type Stainless Steel Grid Coupling with Factory Price   pto shaft cover
editor by CX 2023-06-07

Recent Posts