China Best Sales CZPT Elastic Pin Gear Coupling pto shaft bolt

Product Description

LZ Elastic Pin Gear Coupling(GB/T5015-2003)

LZ High Quality Elastic Pin Gear Coupling uses nylon rod to turn the column pin into the opposite hole between the 2 half coupling and the outer ring inner surface, and transfers the torque through the column pin to realize the connection between 2 half couplings. It has certain shaft offset compensation ability and shock absorption performance. 

LZ High Quality Elastic Pin Gear Coupling is symmetrical and interchangeable, long life, allowing large axial movement, and has the performance of cushioning, damping, wear resistance and so on. The shaft holes of the 2 axle head of the pin type coupling of the LZ elastic column are all straight holes.

LZ Elastic Pin Gear Coupling Basic Parameter And Main Diamention(GB/T5015-2003)

Model Nominal Torque
Tn
Kn·m
Speed
(n)
r/min
Shaft hole diameter
d
Shaft hole length D D1 B S Rotary inertia
kg·m2
 
Mass
kg
Y type  J1type
L
 LZ1 0.112 5000 12-24 27-52 76 40 42 2.5 0.001 1.67
LZ2 0.25 5000 16-32 44-82 90 50 50 2.5 0.003 3.00
LZ3 0.63 4500 25-42 44-112 118 65 70 3.0 0.12 7.31
LZ4 1.8 4200 40-60 84-142 158 90 90 4 0.045 16.20
LZ5 4.5 4000 50-80 84-172 192 120 90 4 0.108 27.02
LZ6 8 3300 60-95 107-172 230 130 112 5 0.242 40.59
LZ7 11.2 2900 70-110 107-212 260 160 112 5 0.443 59.60
LZ8 18 2500 80-130 132-252 300 190 128 6 0.908 94.67
LZ9 25 2300 90-150 132-252 335 220 150 7 1.733 13.8
LZ10 31.5 2100 100-170 167-302 355 245 152 8 2.422 169.3
LZ11 40 2000 110-180 167-302 380 260 172 8 3.369 203.1
LZ12 63 1700 130-200 202-352 445 290 182 8 6.524 296.6
LZ13 100 1500 150-240 202-410 515 345 218 8 14.19 469.2
LZ14 125 1400 170-260 242-410 560 390 218 8 21.67 621.7
LZ15 160 1300 190-300 282-470 590 420 240 10 29.52 730.5
LZ16 250 1000 220-340 282-550 695 490 265 10 62.47 1144
LZ17 355 950 240-380 330-550 770 550 285 10 106.0 1557
LZ18 450 850 250-420 330-650 860 605 300 13 175.4 2062
LZ19 630 750 280-450 380-650 970 695 322 14 323.2 3068
LZ20 1120 650 320-500 380-650 1160 800 355 15 669.4 4715
LZ21 1800 530 380-630 450-800 1440 1571 360 18 1880 8699
LZ22 2240 500 420-750 540-800 1520 1100 405 19 2596 9437
LZ23 2800 460 480-850 540-880 1640 1240 440 20 3982 12095

♦Product Show

♦Other Products List

Transmission Machinery 
Parts Name
Model
Universal Coupling WS,WSD,WSP
Cardan Shaft SWC,SWP,SWZ
Tooth Coupling CL,CLZ,GCLD,GIICL,
GICL,NGCL,GGCL,GCLK
Disc Coupling JMI,JMIJ,JMII,JMIIJ
High Flexible Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS

♦Our Company

HangZhou CZPT Machinery Manufacturing Co., Ltd. is a technology-based company specializing in the design and manufacture of basic transmission parts and various auxiliary non-standard equipment accessories. The products are mainly used in metallurgy, electric power, mining, chemical industry, petroleum, papermaking, shipbuilding, heavy industry, etc.

In many industries, it has provided strong technical and equipment support for many companies around the world. At present, the products are also exported to Russia, Italy, Spain, Brazil, Ukraine, Turkey, Australia, Singapore, Vietnam, Indonesia, Malaysia, Sri Lanka and other countries and regions.

Welcome to customize products from our factory and please provide your design drawings or contact us if you need other requirements.

♦Our Services
1.Design Services
Our design team has experience in cardan shaft relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.

2.Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping

3.Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.

4.Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the market.

5.Quality Control
Every step should be special test by Professional Staff according to the standard of ISO9001 and TS16949.

FAQ
Q 1: Are you trading company or manufacturer?
A: We are a professional manufacturer specializing in manufacturing
various series of couplings.

Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artworks of PDF or AI format.

Q 3:How long is your delivery time?
Generally it is 20-30 days if the goods are not in stock. It is according to quantity.

Q 4: Do you provide samples ? Is it free or extra ?
Yes, we could offer the sample but not for free.Actually we have a very good price principle, when you make the bulk order then cost of sample will be deducted.

Q 5: How long is your warranty?
A: Our Warranty is 12 month under normal circumstance.

Q 6: What is the MOQ?
A:Usually our MOQ is 1pcs.

Q 7: Do you have inspection procedures for coupling ?
A:100% self-inspection before packing.

Q 8: Can I have a visit to your factory before the order?
A: Sure,welcome to visit our factory.

Q 9: What’s your payment?
A:1) T/T. 

Contact Us
Web: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China

Standard Or Nonstandard: Standard
Shaft Hole: 10-32
Torque: 0.112kn.M-2800kn.M
Bore Diameter: 12mm-850mm
Speed: 400r/M-5000r/M
Structure: Flexible
Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Shaft Collar

What Is a PTO Shaft?

There are a few different types of PTO shafts. For example, there are German, Italian, and North American types. Moreover, there are several series options, such as cap-to-cap overall length, bearing diameter, and snap rings. Each type comes with different features and benefits, so it is important to select the correct one for your needs.

Power Take-Off

The Power Take-Off (PTO) shaft is a mechanical coupling system that couples an aircraft’s accessory gear box with an engine. It transmits high rpm and peak torque. It is an indigenously developed product, which has been cleared for flight fitment and successfully completed an engine ground run test. It is now being used by two Indian manufacturers.
There are four main types of PTOs. Semi-permanently mounted power take-offs are common on marine engines and industrial engines. These power take-offs are used to power secondary implements and accessories. In airplanes, accessory drives are also common. Jet aircraft use four different types of PTO units:
PTO shafts are composed of two telescoping pieces that slide into one another. This allows the user to lower and lift the implement. They are also equipped with universal joints, also known as U-joints. These joints allow flexibility and durability. These joints are held together by two yokes at each end of the shaft.
The speed of the power take-off shaft varies according to tractor size. Larger tractors turn the shaft at 1,000 revolutions per minute, while smaller tractors turn it at 540 revolutions per minute. This means that a person trapped in the open PTO shaft could be whipped around nine times in one second, while a person caught in a smaller tractor could be whipped around 16 2/3 times in one minute. Ultimately, the weight of the person could even cause the engine to stall.

Applications

PTO shafts have a variety of uses in the farm equipment industry. They can be connected to a wide variety of work equipment. For instance, a PTO is commonly used to power a hydraulic pump on a tractor’s front end. In such a case, a small shaft with a U-jointed design will attach to a yoke coupler and turn the pump. While this is not as universal as a tractor PTO, it still falls under the category of a PTO.
A PTO system will have a female coupling on one end and a male coupling on the other end. This essentially acts as an extension adaptor. It will transmit torque signals from the shaft to a static cover assembly to determine the speed and torque in both directions. In some cases, a PTO system will be able to record the data directly onto a PC or other electronic device.
In addition to power take-off systems, these systems can also provide power for auxiliary equipment. In addition, a split shaft PTO allows the power of one engine to power the axle of another vehicle. Depending on the engine’s power, a PTO may use either an air or hydraulic pump to power auxiliary equipment.
The PTO shaft is also useful for securing a tractor or equipment. This device features safety shields on both ends and fits securely inside the secondary shaft. The PTO shaft can be found in a variety of shapes. There are domestic-shaped and metric-shaped versions.

Safety precautions

Shaft CollarOperator awareness is key in preventing PTO shaft entanglement. It is important to avoid performing any repairs while the machine is operating. It is also important to avoid wearing loose or frayed clothing that could become entangled in the rotating shaft. It is also essential to read and follow the tractor’s operating manual. Also, ensure that the PTO shaft is only used for its intended purpose.
A power take-off, or PTO, is a type of attachment that transmits mechanical power from a tractor to another piece of farm machinery. Common examples include hay balers, rotary cutters, weed mowers, and forage blowers. These attachments are often equipped with protective shields to prevent entanglement. The shaft should always be covered when in use.
Operators should also avoid getting too close to the PTO shaft. The operator may become entangled if they accidentally approach the spinning shaft. They should also avoid wearing loose clothing because loose clothing can easily get caught in the stub and cause serious injury. These safety precautions are essential for safe operation of all farm machinery.
When using a PTO with heavy drive, it is important to use a heavy-duty model with a PTO shaft that is appropriate for the application. Alternatively, use a universal joint or wide-angle universal joint. These attachments can be a safer alternative to traditional PTOs. Draw-bar pins on trailed machines should be firmly secured to avoid damaging the PTO shaft. It is also recommended to guard all drive shafts on the machine.

Design

A PTO shaft has several advantages. It is a versatile power transmission that is ideal for heavy-duty equipment. Its design is rigid, yet flexible, allowing for high-speed operation. This is due in part to the splines, which prevent the parts from separating during operation.
The gears of a PTO drive are made from high-quality steel, which increases their durability. They are made from SCM 440 gear material. This material has a high tensile strength and a high yield point. It also has a high Young’s modulus of 206,000 N/mm2. Its Poisson’s ratio is 0.3, while its pressure angle is twenty degrees. In addition, its addendum and dedendum coefficients are both greater than 1.0.
Designed for use on industrial and marine engines, PTOs allow the driver to transfer power from a primary mover to a PTO-powered attachment. They are easy to install and offer improved service life and decreased downtime. In aircraft applications, PTOs are also common. Jet aircraft and agricultural equipment often use PTOs.
The PTO shaft’s dimensions are crucial for preventing vibration. It should extend at least 14 inches from the hitch point to the input shaft of the implement. In some cases, a shorter shaft may not fit the tractor, so it is important to choose the right size. If the PTO shaft is too short, it could cause the two parts to separate when the tractor is turning a corner.

Cost

Shaft CollarA PTO shaft is a very important part of a tractor because it transfers power to an attached attachment. These attachments typically include rotary tillers, brush cutters, hush hug, and mowers. While many attachments use a PTO shaft, the connection flange is not standardized. Some older models of tractors may have a connection flange that is closer to the tractor.
A PTO shaft will work with either a standard or a Weasler yoke. You can also choose from metric and North American models. There are also Italian PTO shafts. To ensure the best performance and durability, it is essential to ensure that the shaft is free of damage. To avoid such damage, a PTO shaft should be purchased from a reputable supplier.
PTO shafts are made from high-quality steel and feature a 1-3/8″ 6-spline at both the tractor and the implement end. In addition, splined PTO shafts are easy to replace and provide excellent horsepower. These PTO shafts can also increase a tractor’s work efficiency.
The cost of a PTO shaft replacement can vary. The average price range for a front-wheel-drive half-shaft is $470 to $940, and the cost for a rear-wheel-drive drive half-shaft replacement is about $1,600 to $2,000. The parts cost about two hundred dollars and the labor could take an hour or more.

Buying guide

If you’re looking to replace a PTO shaft on a lawn tractor, it’s important to consider several factors. First, the PTO shaft needs to be compatible with the tractor you plan to use it on. Then, you need to determine which size universal joint you need. To do this, you can use a PTO shaft size chart.
The PTO shaft is the component that transfers power from the tractor to the attached implement. It’s made up of several parts, including the internal and external PTO yoke, the universal joint, and the safety chain and shield. There are several types of PTO shafts available. You’ll want to choose the right size for your machine, as well as the number of PTO shafts you need.
A PTO shaft is essential for a tractor because without it, the tractor cannot drive. Understanding the PTO parts will help you operate farm machinery more effectively. For instance, if you’re buying a new Power Take Off shaft, you’ll want to look for one that’s compatible with the model and year of the tractor.
You’ll also need to consider the length of the PTO shaft. A PTO shaft can vary from 53 inches when compressed to 77 inches when fully extended. The most common length for a PTO shaft is about fifty-three inches, but you can also choose a longer one if you need more flexibility.
China Best Sales CZPT Elastic Pin Gear Coupling   pto shaft boltChina Best Sales CZPT Elastic Pin Gear Coupling   pto shaft bolt
editor by CX 2023-05-31

Recent Posts